TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 200 of 336
TM 9-2520-238-34 REPLACE STRAIGHT ADAPTER AND BRAKE SHOE ASSEMBLIES — Continued 0021 00 REMOVAL C A U T I O N Take care during handling and disassembly to protect machined surfaces, gears, bearings, and components from damage. Provide safe blockage arrangement. 1. Drain differential oil into suitable container (see your PMCS). 2. Remove dipstick (1) and breather (2) from differential (3). 3. Remove locknut (4), screw (5), clamp (6), and clamp (7). Separate differential oil hose (8) from circuit 328 lead (9). Discard locknut. 4. Remove screw (10), washer (11), clamp (12) and oil hose (8) from differential gearbox (13). 5. Disconnect oil hose (8) from elbow (14) and elbow (15). 6. Remove elbow (15) from adapter (16). 7. Remove elbow (14) from differential gearbox (13). 0021 00-2 Parts of the brake assembly may be coated with asbestos dust. Breathing this dust can harm personnel. Use a filter mask approved for use against asbestos dust. Never use compressed air or dry brush to clean these assemblies. Use an industrial type vacuum cleaner with a high-efficiency filter system to remove dust. Use water and a soft bristle brush or cloth to remove dirt or mud. WARNING