TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 189 of 336
TM 9-2520-238-34 REPAIR FINAL DRIVE ASSEMBLIES A AND B — Continued 0020 00 9. Apply a light coat of antiseize compound to clean threads of eight cap screws (1). Place new gasket (2) and retainer (3) on housing (4). Secure with eight new key washers (5) and cap screws (1). Torque screws to 264-288 lb-in (30-32 N•m). Use torque wrench (WP 0033 00, Item 41). Bend tabs on key washers. NOTE Both inner race and outer race of roller bearings are matched sets and must be replaced if either is defective. 10. If removed during disassembly, press new outer race (6) or outer race (7) in bore(s) in housing cover (8). Press applicable new inner race (9) or inner race (10) on hub(s) of spur gear (11) or spur gear (12). Use arbor press and remover/replacer. 0020 00-9