TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 172 of 336
TM 9-2520-238-34 REPAIR TRANSFER GEARCASE F — Continued 0019 00 31. Lubricate new packing (1) with grease or petrolatum. Install packing and packing retainer (2) on shouldered shaft of first intermediate gear in retaining plate (3). 32. Install new machine key (4) and fan drive pulley (5) on shouldered shaft. Secure with washer (6) and cap screw (7). Tighten screw to 32-38 lb-ft (44-51 N.m) torque. Use torque wrench (WP 0033 00, Item 44). 33. Insert tail of new dust deflector (8) through hole connecting annular oil groove and bearing area. Pull tail tight, twist 90 degrees, and fold tightly into groove. 34. If removed, install expansion plug (9) in generator drive pulley (10). Clean mating surface of plug with cleaning compound. Apply a thin film of sealing compound (WP 0035 00, Item 12) or (WP 0035 00, Item 13) to mating surface of plug. Install plug in pulley. 0019 00-20