TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 167 of 336
TM 9-2520-238-34 REPAIR TRANSFER GEARCASE F — Continued 0019 00 14. Lubricate new packing (1) with grease or petrolatum. Install packing and dust deflector (2) on shaft on disk assembly (3). C A U T I O N To prevent damage to encased oil seals, do not place housing in upright position until bearing retainers are installed. To prevent damage to encased oil seals, do not press seals beyond face of bore. After installation seal must be flush with outer surface. 15. Clean encased oil seals. Apply a thin even film of sealing compound (WP 0035 00, Item 12) or (WP 0035 00, Item 13) to mating surface of seal (4) and seal (5). Position each seal with lip toward bore. Use a flat block of wood and soft plastic hammer to tap seals in place. 16. Align splines of disk assembly (3) with splines of output gear and insert disk assembly shaft into output gear. 0019 00-15