TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 165 of 336
TM 9-2520-238-34 REPAIR TRANSFER GEARCASE F — Continued 0019 00 7. If dowel holes exist in second intermediate gear (1) and primary pump-drive gear (2), align holes in each gear. Secure gears together with new spring pin (3). Stake pin three equal places at both ends. 8. If dowel holes do not exist in either second intermediate gear (1) or primary pump-drive gear (2), assemble gears and drill a 0.375 to 0.380 inch diameter hole using a 3/8 inch drill bit. Use twist drill set and portable electric drill. Secure second intermediate gear (1) and primary pump-drive gear (2) together with new spring pin (3). Stake pin three equal places at both ends. 9. If removed, install bearing cone (4) and bearing cone (5) on helical gearshaft cluster (6). Install helical gearshaft cluster in housing (7) meshing teeth of second intermediate gear (1) with first intermediate gear (8). 10. If removed, install bearing cone (9) and bearing cone (10) on output gear (11). Install output gear in housing (7) meshing teeth with second intermediate gear (1). 0019 00-13