TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 162 of 336
TM 9-2520-238-34 REPAIR TRANSFER GEARCASE F — Continued 0019 00 NOTE Do not remove tapered roller bearing cones or cups that are pressed in plates unless inspection indicates a replacement is needed. 25. Remove output gear (1) from gearcase housing (2). Separate bearing cone (3) and bearing cone (4) from gear. 26. Remove helical gearshaft cluster (5) as an assembly from housing (2). Separate bearing cone (6) and bearing cone(7) from cluster. If replacement is needed, use brass drift pin and hammer to remove spring pin (8). Separate second intermediate gear (9) from primary pump-drive gear (10). Discard spring pin. 27. Remove first intermediate gear (11) from housing (2). Separate bearing cone (12) and bearing cone (13) from gear. 0019 00-10