TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 156 of 336
TM 9-2520-238-34 REPAIR TRANSFER GEARCASE F — Continued 0019 00 12. Straighten tabs on four key washers (1). Remove four cap screws (2), key washers, and generator drive assembly (3) from cover (4). Discard key washers. 13. Remove retaining ring (5) from hub on generator drive pulley (6). Separate pulley from input bearing retaining plate (7). Discard retaining ring. Remove retaining ring (8), ball bearing (9), sleeve spacer (10), ball bearing (11), and retaining ring (12) from retaining plate. Remove encased oil seal (13) from retaining plate. Discard retaining ring (5), retaining ring (8), retaining ring (12), and oil seal. If needed, remove expansion plug (14) from pulley (6). 14. Remove dust deflector (15) from hole connecting annular oil groove and bearing area. 15. Remove laminated shim (16) and packing (17) from retaining plate (7). Discard shim and packing. 0019 00-4