TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 152 of 336
TM 9-2520-238-34 REPLACE TRANSFER GEARCASE A, B, OR C WITH SERVICE SPARE TRANSFER GEARCASE E — Continued 0018 00 NOTE If transfer gearcase B or C is being replaced, use retained screw. 12. Install machine key (1) on fan drive shaft (2). Install two-grooved pulley (3) on shaft with washer (4) and cap screw (5). Tighten screw to 32-38 lb-ft (44-51 N•m) torque. Use torque wrench (WP 0033 00, Item 44). 15. Install all unused parts on unserviceable transfer gearcase. 16. Tag transfer gearcase as unserviceable. Identify gearcase by part number or national stock number and ship to repair facility. END OF TASK 0018 00-10 8 Take care to prevent damage to machined surfaces, gears, bearings, and other components during maintenance activities. N O WARNING I T U A Lifting or moving objects in excess of 70 pounds could injure you. Make sure to get an assistant or use a lifting device to move heavy objects. C 13. Install suitable hoist and sling through eyebolt (8). 14. If testing is needed, perform run-in test, see page 0017 00-25, setps 1 through 5.