Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download

Page 125 of 336

TM 9-2520-238-34 REPAIR TRANSFER GEARCASES A, B, AND C — Continued 0017 00 30. If inspection indicates damage, remove alignment pin(s) (1) from housing (2). Discard pin(s) NOTE Do not remove tapered roller bearing cones or cups that are pressed in place unless inspection indicates a replacement is needed. 31. Remove output gear (3) from housing (2). Separate bearing cone (4) and bearing cone (5) from gear. 32. Remove helical gearshaft cluster (6) as an assembly from housing (2). Separate bearing cone (7) and bearing cone (8) from cluster. If replacement is needed, use brass drift pin and hammer to remove spring pin (9). Separate primary pump-drive gear (10) from second intermediate gear (11). Discard spring pin. 0017 00-11