TM-9-2520-238-34 Direct Support for M113 Family Major Assemblies Download
Page 107 of 336
TM 9-2520-238-34 REPAIR COOLING FAN RIGHT ANGLE DRIVE C (M113A3 FOV ONLY) — Continued 0016 00 12. Install sleeve spacer (1) on shaft and bearing (2). 13. Press bearing sleeve (3) into ball bearing (4) and install ball bearing into bearing retaining plate (5). Use arbor press. C A U T I O N To prevent damage to oil seal, do not press seal beyond face of bore. After installation seal must be flush with outer surface. 14. Lubricate new packing (6) and new packing (7) with grease or petrolatum. Install packings in bearing retaining plate (5). 15. Install new oil seal (8) and oil seal (9) into oil seal retainer (10) and oil seal retainer (11) as follows: a. Clean mating surfaces of oil seal (8), oil seal (9), oil seal retainer (10), and oil seal retainer (11). Apply a thin film of sealing compound (WP 0035 00, Item 12) or (WP 0035 00, Item 15) to outer edge of oil seals. b. Press oil seal (8) and oil seal (9) into retainer (10) and retainer (11). Use arbor press. 0016 00-13