TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 86 of 472
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Inspect drive shaft and fan pulley for wear and damage. Replace bad drive shaft or front pulley. 2. Inspect bearing support and fan housing for wear and damage. Replace if necessary. END OF TASK ASSEMBLY 1. Place bearing housing (Figure 3, Item 1) on flat surface with bearing on top. Tap outer race of bearing (Figure 3, Item 3) evenly until bearing race is seated flush with edge of housing. Tap edge of bearing downward to seat bearing in housing. Figure 3. Bearing Housing – Assembly. 2. Press drive shaft (Figure 4, Item 2) in bearing housing (Figure 4, Item 1). Figure 4. Fan Drive Shaft and Bearing Housing – Assembly. FOLLOW ON MAINTENANCE 1. Return to supply per local Standard Operating Procedures (SOP). END OF TASK END OF WORK PACKAGE TM 9-2350-277-40&P 0009 0009‐2