TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 72 of 472
13. Align ring tabs (Figure 21, Item 38) on clutch assembly (Figure 21, Item 31) before installing shaft into inner housing (Figure 21, Item 25). 14. Press shaft and clutch assembly (Figure 21, Item 26) into inner housing (Figure 21, Item 25). Figure 21. Shaft and Clutch Assembly – Installation. 15. Lightly lubricate both outer bearing races (Figure 22, Item 32) and (Figure 22, Item 24). 16. Support front housing (Figure 22, Item 19) only during installation of inner housing (Figure 22, Item 25) on arbor press to allow inner housing to extend down past front housing edge. 17. Press inner housing (Figure 22, Item 25) (with clutch and shaft) into front housing (Figure 22, Item 19). 18. Install large lock ring (Figure 22, Item 22) that secures the inner housing (Figure 22, Item 25) to the front housing (Figure 22, Item 19). 19. Lubricate new encased oil seal (Figure 22, Item 36). 20. Install new encased oil seal (Figure 22, Item 36) into front housing (Figure 22, Item 19). Use brass drift and hammer. Figure 22. Oil Seal and Lock Ring – Installation. TM 9-2350-277-40&P 0007 0007‐12