TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 64 of 472
9. Remove cover plate (Figure 6, Item 14) and preformed packing (Figure 6, Item 16) from rear housing (Figure 6, Item 17). Discard preformed packing. Remove two jacking screws (Figure 6, Item 12) from cover plate (Figure 6, Item 14). 10. Press encased oil seal (Figure 6, Item 15) out of cover plate (Figure 6, Item 14). Discard oil seal. Figure 6. Cover Plate – Removal. NOTE When the front housing is separated from the rear housing, the inner housing with shaft and clutch assembly may stay with the front housing. 11. Remove six screws (Figure 7, Item 21) and six washers (Figure 7, Item 20) from front housing (Figure 7, Item 19). 12. Separate front housing (Figure 7, Item 19) from rear housing (Figure 7, Item 17). Tap off at shaft with rubber hammer. 13. Remove gasket (Figure 7, Item 18) from rear housing (Figure 7, Item 17). Discard gasket. TM 9-2350-277-40&P 0007 0007‐4