TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 58 of 472
CLEANING RADIATOR 1. Clean radiator. See TM 750-254. Use safety goggles, rubber gloves, and rubber apron. 2. Thoroughly flush radiator. See TM 750-254. Use radiator test plug set. 3. Retest radiator for flow. 4. If water does not flow freely from inlet opening after cleaning, clean by RODDING, Step 4. DISASSEMBLE 1. Heat, melt, and wire brush off the solder that secures two side brackets (Figure 2, Item 8) and (Figure 2, Item 6) to two end tanks (Figure 2, Item 4) and (Figure 2, Item 7). 2. Heat, melt, and wire brush off the solder that secures two end tanks (Figure 2, Item 4) and (Figure 2, Item 7) to core (Figure 2, Item 5). Figure 2. Radiator Disassembly. TM 9-2350-277-40&P 0006 CHANGE 1 0006‐2