TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 32 of 472
TM Technical Manual TMDE Test, Measurement, and Diagnostic Equipment UOC Usable On Code UV Ultraviolet U/I Unit of Issue V Volt WP Work Package Metric equivalents are used throughout this manual. Metric symbols and units are: C Celsius cm Centimeter kPa Kilopascal ml milliliter mm Millimeter N·m Newton-meters QUALITY OF MATERIAL Material used for replacement, repair, or modification must meet the requirements of this Technical Manual (TM). If quality of material requirements are not stated in this manual, the material must meet the requirements of the drawings, standards, specifications, or approved engineering change proposals applicable to the subject equipment. SAFETY, CARE, AND HANDLING See Warning Summary in front of manual. REPAIR PARTS, SPECIAL TOOLS, SUPPORT EQUIPMENT, AND TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE) COMMON TOOLS AND EQUIPMENT For authorized common tools and equipment, see the Modified Table of Organization and Equipment (MTOE) for your unit. Common tools and equipment needed for the maintenance procedures in the manual are listed in WP 0069. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT Special tools, TMDE, and support equipment needed for the maintenance procedures in this manual are listed in WP 0069. Additional TMDE and special tools are listed in TM 9-2350-277-13&P. NOTE More than one model of multimeter is available to you in the supply system. You may use any model available. REPAIR PARTS Repair parts are listed and illustrated in this manual. See Chapter 16 work package index for a complete list of Repair Parts and Special Tools List (RPSTL) work packages. Maintenance and supply personnel can order them. END OF WORK PACKAGE TM 9-2350-277-40&P 0001 CHANGE 1 0001‐4