Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download

Page 276 of 472

ASSEMBLY NOTE See wiring diagrams Figure 5, page 0038-6 and/or Figure 6, page 0038-6 for assembly of wires to connectors/binding posts. 1. Install 24 binding posts (Figure 3, Item 4) on curbside panel faceplate (Figure 3, Item 3) and/or roadside panel faceplate (Figure 3, Item 7). 2. Connect leads (Figure 3, Item 2) to connector J3 (Figure 3, Item 13). 3. Install connector J3 (Figure 3, Item 13) on box (Figure 3, Item 1). Secure with four screws (Figure 3, Item 8) and four new locknuts (Figure 3, Item 14). 4. Install four connectors J109, J110, J111, and J112 (Figure 3, Item 11) and cables (Figure 3, Item 12) on faceplate (Figure 3, Item 7). Secure with four lockwashers (Figure 3, Item 10) and four jamnuts (Figure 3, Item 9). 5. Install four connectors J105, J106, J107 and J108 (Figure 3, Item 11) and cables (Figure 3, Item 12) on faceplate (Figure 3, Item 3). Secure with four lockwashers (Figure 3, Item 10) and four jamnuts (Figure 3, Item 9). 6. Install four connectors J1, J2, J4, J5 (Figure 3, Item 11) and cables (Figure 3, Item 12) on box (Figure 3, Item 1). Secure with four lockwashers (Figure 3, Item 10) and four jamnuts (Figure 3, Item 9). Figure 3. Connector/Post – Installation. TM 9-2350-277-40&P 0038 0038‐4