TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 275 of 472
3. Remove four connectors J1, J2, J4, J5 (Figure 2, Item 11), four cables (Figure 2, Item 12), four lockwashers (Figure 2, Item 10), and four jamnuts (Figure 2, Item 9) from box (Figure 2, Item 1). NOTE Do Step 4 for curbside panel only. Do Step 5 for roadside panel only. 4. Remove four connectors J105, J106, J107, and J108 (Figure 2, Item 11), four cables (Figure 2, Item 12), four lockwashers (Figure 2, Item 10), and four jamnuts (Figure 2, Item 9) from faceplate (Figure 2, Item 3). 5. Remove four connectors J109, J110, J111, and J112 (Figure 2, Item 11), four cables (Figure 2, Item 12), four lockwashers (Figure 2, Item 10), and four jamnuts (Figure 2, Item 9) from faceplate (Figure 2, Item 7). 6. Remove four screws (Figure 2, Item 8), four locknuts (Figure 2, Item 14), and connector J3 (Figure 2, Item 13) from box (Figure 2, Item 1). Discard locknuts. 7. Disconnect leads (Figure 2, Item 2) from connector J3 (Figure 2, Item 13). 8. Remove 24 binding posts (Figure 2, Item 4) from curbside panel faceplate (Figure 2, Item 3) and/or roadside panel faceplate (Figure 2, Item 7). Figure 2. Connector/Post – Removal. END OF TASK TM 9-2350-277-40&P 0038 0038‐3