TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 265 of 472
SUSTAINMENT MAINTENANCE REPLACE CABLE ASSEMBLY W115 INITIAL SETUP: Tools and Special Tools Electronic Equipment Tool Kit (WP 0069, Item 28) Materials/Parts Lockwasher (14) Tie Strap (AR) Personnel Required Helper (H) Radio Repairer 29E10 Equipment Condition Engine stopped (TM 9-2350-277-13&P) Carrier blocked (TM 9-2350-277-13&P) All external power disconnected (TM 11-7010-256-12&P) Battery ground lead disconnected (TM 9-2350-277-13&P) REMOVAL 1. Lift and secure lid (Figure 1, Item 1) on external communication box A11 (Figure 1, Item 2). 2. Remove 14 screws (Figure 1, Item 5), lockwashers (Figure 1, Item 4), and faceplate (Figure 1, Item 6) from external communication box A11 (Figure 1, Item 2). Discard lockwashers. NOTE Tag all leads before disconnecting from binding posts for proper installation later. 3. Remove 16 binding posts (Figure 1, Item 7) and leads (Figure 1, Item 8) from external communication box A11 (Figure 1, Item 2). TM 9-2350-277-40&P 0037.3 0037.3‐1 CHANGE 1