TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 257 of 472
SUSTAINMENT MAINTENANCE REPLACE RF 1, 2, 3, 4 CABLE ASSEMBLIES W111, W112, W113, AND W114 INITIAL SETUP: Tools and Special Tools Electronic Equipment Tool Kit (WP 0069, Item 28) Materials/Parts Lockwasher (14) Tie Strap (AR) Personnel Required Helper (H) Radio Repairer 29E10 Equipment Condition Engine stopped (TM 9-2350-277-13&P) Carrier blocked (TM 9-2350-277-13&P) All external power disconnected (TM 11-7010-256-12&P) Battery ground lead disconnected (TM 9-2350-277-13&P) REMOVAL 1. Lift and secure cover (Figure 1, Item 1) of external communications box A11 (Figure 1, Item 2). 2. Remove 14 screws (Figure 1, Item 8), lockwashers (Figure 1, Item 7), and faceplate (Figure 1, Item 9) from external communications box A11 (Figure 1, Item 2). Discard lockwashers. NOTE Tag all cables before disconnecting them. 3. Disconnect W111 P2 cable (Figure 1, Item 11) from jack J115 (Figure 1, Item 4) on faceplate (Figure 1, Item 9). TM 9-2350-277-40&P 0037.2 0037.2‐1 CHANGE 1