Sign up to sell your inventory with NSN Lookup

TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download

Page 246 of 472

DISASSEMBLY 1. Remove four screws (Figure 1, Item 6), locknuts (Figure 1, Item 7), and two latches of latch assembly (Figure 1, Item 5) from communication box (Figure 1, Item 4). Discard locknuts. 2. Remove four screws (Figure 1, Item 11), four locknuts (Figure 1, Item 12), and two catches of latch assembly (Figure 1, Item 5) from communication box lid (Figure 1, Item 13). Discard locknuts. 3. Remove four screws (Figure 1, Item 1), four locknuts (Figure 1, Item 3), and latch half of door holder (Figure 1, Item 2) from lid (Figure 1, Item 13). Discard locknuts. 4. Remove four screws (Figure 1, Item 1), four locknuts (Figure 1, Item 3), and catch half of door holder (Figure 1, Item 2) from communication box (Figure 1, Item 4). Discard locknuts. 5. Remove two screws (Figure 1, Item 10), four washers (Figure 1, Item 9), two locknuts (Figure 1, Item 8), and lid (Figure 1, Item 13) from communication box (Figure 1, Item 4). Discard locknuts. Figure 1. External Communication Box – Disassembly. NOTE Replace pads only if damaged. NOTE If cable W118 is being replaced, remove connector (Figure 2, Item 33) before discarding. TM 9-2350-277-40&P 0037 0037‐2