TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 234 of 472
DISASSEMBLY 1. Remove four screws (Figure 1, Item 7) and cover (Figure 1, Item 6) with gasket from extension box (Figure 1, Item 2). 2. Remove four screws (Figure 1, Item 1), four locknuts (Figure 1, Item 4), and connector J1 (Figure 1, Item 14) from extension box (Figure 1, Item 2). Discard locknuts. 3. Remove four screws (Figure 1, Item 1), four locknuts (Figure 1, Item 4), and connector J2 (Figure 1, Item 3) from extension box (Figure 1, Item 2). Discard locknuts. 4. Remove 16 screws (Figure 1, Item 8), 16 locknuts (Figure 1, Item 5), four dust caps (Figure 1, Item 9), and four connectors J18-J21 (Figure 1, Item 13) from cover (Figure 1, Item 6). Discard locknuts. 5. Remove four screws (Figure 1, Item 10), four locknuts (Figure 1, Item 4), dust cap (Figure 1, Item 11), and connector J23 (Figure 1, Item 12) from cover (Figure 1, Item 6). Discard locknuts. 6. Disconnect leads from connectors if necessary. Figure 1. Roadside DC Power Extension Box – Disassembly. END OF TASK TM 9-2350-277-40&P 0035 CHANGE 1 0035‐2