TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 226 of 472
12. Install four leads (Figure 4, Item 14) on posts (Figure 4, Item 11) and (Figure 4, Item 13). 13. Install connector J137 (Figure 4, Item 10), gasket (Figure 4, Item 7), dust cap (Figure 4, Item 12), four screws (Figure 4, Item 9), and four new locknuts (Figure 4, Item 5) on faceplate (Figure 4, Item 3). 14. Install connector J8 (Figure 4, Item 6), gasket (Figure 4, Item 7), four screws (Figure 4, Item 9), and four new locknuts (Figure 4, Item 5) on box (Figure 4, Item 8). 15. Install new gaskets (Figure 4, Item 4) by applying a thin coat of adhesive to box surface and to gasket surface. Allow ten to twenty minutes to dry (tacky to the touch). Position gasket on box (Figure 4, Item 8) and press firmly into place. 16. Install faceplate (Figure 4, Item 3), 14 new lockwashers, (Figure 4, Item 2) and 14 screws (Figure 4, Item 1) on box (Figure 4, Item 8). Figure 4. Tent Interface Panel Box – Assembly. TM 9-2350-277-40&P 0033 0033‐6