TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 222 of 472
DISASSEMBLY 1. Remove 14 screws (Figure 1, Item 1), 14 lockwashers (Figure 1, Item 2), and faceplate (Figure 1, Item 3) from box (Figure 1, Item 8). Discard lockwashers. NOTE Do not remove gasket unless gasket is damaged. 2. If any of four gaskets (Figure 1, Item 4) are damaged, remove only the damaged gaskets from box (Figure 1, Item 8). 3. Remove four locknuts (Figure 1, Item 5), four screws (Figure 1, Item 9), connector J8 (Figure 1, Item 6), and gasket (Figure 1, Item 7) from box (Figure 1, Item 8). Discard locknuts. 4. Remove four locknuts (Figure 1, Item 5), four screws (Figure 1, Item 9), dust cap (Figure 1, Item 12), connector J137 (Figure 1, Item 10), and gasket (Figure 1, Item 7) from faceplate (Figure 1, Item 3). Discard locknuts. 5. Disconnect four leads (Figure 1, Item 14) from four posts (Figure 1, Item 11) and (Figure 1, Item 13). Figure 1. Tent Interface Panel Box – Disassembly. 6. Disconnect three lead terminals (Figure 2, Item 20) from connector J11 (Figure 2, Item 19). 7. Disconnect three terminals (Figure 2, Item 31) from connector J12 (Figure 2, Item 10). 8. Disconnect three lead terminals (Figure 2, Item 32) from connector J13 (Figure 2, Item 33). TM 9-2350-277-40&P 0033 0033‐2