TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 210 of 472
INSTALLATION 1. Install new preformed packing (Figure 2, Item 10) and new gasket (Figure 2, Item 9) in groove of burner (Figure 2, Item 1). 2. Place burner (Figure 2, Item 1) in heater (Figure 2, Item 8). Secure with four nuts (Figure 2, Item 5), four bolts (Figure 2, Item 7), and four clamps (Figure 2, Item 6). 3. Install ground strap (Figure 2, Item 4) on burner (Figure 2, Item 1). Secure with screw (Figure 2, Item 3) and washer (Figure 2, Item 2). Figure 2. Burner Packing and Gasket – Installation. FOLLOW ON MAINTENANCE 1. Install fixed resistor (WP 0029). 2. Install fuel control valve (WP 0026). 3. Return to supply per local Standard Operating Procedures (SOP). END OF TASK END OF WORK PACKAGE TM 9-2350-277-40&P 0030 0030‐2