TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 209 of 472
SUSTAINMENT MAINTENANCE REPLACE BURNER PACKING AND GASKET INITIAL SETUP: Tools and Special Tools Automotive Fuel and Electrical System Repair Tool Kit (WP 0069, Item 26) Metric Wrench Kit (WP 0069, Item 35) Materials/Parts Gasket Preformed Packing Personnel Required Track Vehicle Repairer 91H10 Equipment Condition Fixed resistor removed (WP 0029) Fuel control valve removed (WP 0026) REMOVAL 1. Remove screw (Figure 1, Item 3), washer (Figure 1, Item 2) and ground strap (Figure 1, Item 4) from burner assembly (Figure 1, Item 1). 2. Remove four nuts (Figure 1, Item 5), four bolts (Figure 1, Item 7), four clamps (Figure 1, Item 6), and burner (Figure 1, Item 1) from heater (Figure 1, Item 8). 3. Remove preformed packing (Figure 1, Item 10) and gasket (Figure 1, Item 9) from burner (Figure 1, Item 1). Discard preformed packing and gasket. Figure 1. Burner Packing and Gasket – Removal. END OF TASK TM 9-2350-277-40&P 0030 0030‐1