Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download

Page 205 of 472

SUSTAINMENT MAINTENANCE REPLACE FIXED RESISTOR INITIAL SETUP: Tools and Special Tools Automotive Fuel and Electrical System Repair Tool Kit (WP 0069, Item 26) General Mechanic's Tool Kit (WP 0069, Item 29) Metric Wrench Kit (WP 0069, Item 35) Materials/Parts Sleeve Personnel Required Track Vehicle Repairer 91H10 Equipment Condition Engine coolant heater removed from carrier (TM 9-2350-277-13&P) REMOVAL 1. Remove two screws (Figure 1, Item 15) and fuel control valve bracket (Figure 1, Item 14) from coolant heater (Figure 1, Item 13). 2. Loosen four nuts (Figure 1, Item 12), and remove end cover (Figure 1, Item 6) from heater (Figure 1, Item 13). 3. Remove two screws (Figure 1, Item 2) that secure tapping plate (Figure 1, Item 11), flange (Figure 1, Item 3), and fuel tube (Figure 1, Item 4) to heater (Figure 1, Item 13). 4. Remove nut (Figure 1, Item 7), fixed resistor (Figure 1, Item 9), flange (Figure 1, Item 3), fuel tube (Figure 1, Item 4), and sleeve (Figure 1, Item 1) from heater (Figure 1, Item 13). 5. Remove nut (Figure 1, Item 10), screw (Figure 1, Item 5), and electrical lead (Figure 1, Item 8) from fixed resistor (Figure 1, Item 9). Figure 1. Fixed Resistor – Removal. END OF TASK TM 9-2350-277-40&P 0029 0029‐1