TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 176 of 472
83. Install wiring harness plate (Figure 25, Item 142) to driver's compartment bulkhead. Secure with four screws (Figure 25, Item 129) and washers (Figure 25, Item 130). Figure 25. Wiring Harness/Bulkhead Plate – Installation. 84. Remove two screws (Figure 26, Item 146) and control panel (Figure 26, Item 145) from control box case (Figure 26, Item 144). 85. Remove and discard two screws, nuts, and washers supplied with control box case (Figure 26, Item 144). 86. Install control box case (Figure 26, Item 144) on hull bracket (Figure 26, Item 143). Secure with two screws (Figure 26, Item 149). 87. Install control panel (Figure 26, Item 145) to control box case (Figure 26, Item 144). Secure with two screws (Figure 26, Item 146). 88. Connect circuit 400A lead (Figure 26, Item 148) to control box lead (Figure 26, Item 147). Figure 26. Control Panel – Replacement. TM 9-2350-277-40&P 0024 0024‐20