TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download

Page 168 of 472

56. Install four grommets (Figure 12, Item 89) and two battery plates (Figure 12, Item 88) in battery box (Figure 12, Item 82). 57. Install four clamps (Figure 12, Item 87) on two battery plates (Figure 12, Item 88). Figure 12. Battery Plates – Installation. 58. Remove two blank grommets (Figure 13, Item 90) from driver's floor plate on older models. On newer models remove two nuts (Figure 13, Item 93), four washers (Figure 13, Item 92), and two screws (Figure 13, Item 91). Discard grommets or nuts, washers, and screws. Figure 13. Grommet – Removal. 59. Install two elbows (Figure 14, Item 94) in driver's floor plate and secure with two nuts (Figure 14, Item 95). Figure 14. Driver's Floor Plate Elbow – Installation. TM 9-2350-277-40&P 0024 002412