TM-9-2350-277-40&P Sustainment Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 137 of 472
3. Place board under damaged area for a flat working surface. 4. Buff patch and damaged area of tent with a wire brush. WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 5. Center patch over damaged area. Apply adhesive to patch and patch edge with a soft bristle brush, making a circle on tent. 6. Lift patch. Apply adhesive to area of tent inside adhesive circle. 7. Allow adhesive to dry until tacky. 8. Press cement surfaces together firmly with roller while tacky. 9. Seal by wiping edge of patch with soft bristle brush. TM 9-2350-277-40&P 0021 0021‐5