TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 619 of 820
TM 9-2350-277-34 REPAIR POWER CONTROL ENCLOSURE, RIGHT PANEL (M1068A3 ONLY) — Continued 0092 00 14. Remove circuit leads 22A, 21A, 3AA, 18C, and 27A (1) from ground fault interrupter (2). Remove two screws (3), lockwashers (4), and ground fault interrupter (2) from enclosure (5). Discard lockwashers. NOTE See wiring diagram to disconnect wires from terminal blocks. There are set screws securing each wire. 15. Remove all wiring from terminal blocks (6) by loosening all set screws. Remove four screws (7), locknuts (8), eight washers (9), and two terminal blocks (6) from enclosure (5). Discard locknuts. 0092 00-5