TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 587 of 820
TM 9-2350-277-34 INSTALL ANCHOR KIT (M1059A3 ONLY) — Continued 0087 00 7. Measure and mark the center points for 10 holes, using the dimensions given below. 8. Drill and tap 10 holes as marked in Step 7. Tap holes to 1/2-13 UNC-2B, 1 inch (3 cm) minimum to 1 9/16 inch (4 cm) maximum full thread depth. 0087 00-5