TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 568 of 820
TM 9-2350-277-34 REPLACE DIODE AND MOTOR RESISTOR — Continued 0083 00 4. Remove nut (8), screw (9), and motor resistor (6) from bracket (10). INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Use multimeter to check diode. Set meter to above 200 ohms range. Place probes on each end of diode and note reading. Switch probes and note reading. One reading must indicate continuity and other reading must indicate high resistance, if they do not replace diode. 2. Use multimeter to check motor resistor. Multimeter must read 250-300 ohms. Replace out of range resistor. 0083 00-2