TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 564 of 820
TM 9-2350-277-34 REPLACE FIXED RESISTOR — Continued 0081 00 6. Use multimeter (16). Check resistance from circuit 7 terminal end (17) to strap end (18) of fixed resistor (11). 7. Multimeter should read 1.6 to 1.7 ohms. If reading is not in range, replace fixed resistor. INSTALLATION 1. If fixed resistor (11) is to be replaced, grind or cut sleeve (12) off of fuel tube (9). Discard sleeve. 2. Install fixed resistor (11) and new sleeve (12) on fuel tube (9). 3. Secure electrical lead (15) to fixed resistor (11) with screw (14) and nut (13). 4. Secure fixed resistor (11) to heater (3) with nut (10). 5. Secure fuel tube (9), flange (8), and tapping plate (7) to heater (3) with two screws (6). 6. Install end cover (5) on heater (3). Tighten four nuts (4). 7. Secure fuel control valve bracket (2) to heater (3) with two screws (1). FOLLOW-THROUGH STEPS 1. Install engine coolant heater in carrier (see your -20). END OF TASK 0081 00-2