TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 537 of 820
TM 9-2350-277-34 INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3) — Continued 0075 00 106. Open fuel tank shutoff valves (1). FOLLOW-THROUGH STEPS 1. Lower power plant grille (see your -20). 2. Fill carrier cooling system (see your -20). 3. Connect battery ground lead (see your -20). 4. Bleed coolant heater fuel line (see your -20). 5. Start coolant heater (see your -10). Check that heater works right and does not leak. Turn coolant heater off. 6. Install rear and right front floor plates (see your -20). 7. Install driver’s compartment floor plates (see your -20) 8. Install driver’s power plant access panel (see your -20). 9. Install power plant rear access panel (see your -20). 10. Close power plant front access door (see your -20). 11. Raise trim vane (see your -10). END OF TASK 0075 00-25/26 blank Change 2