TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 53 of 820
TM 9-2350-277-34 VEHICLE BATTERIES DISCHARGE WITH EXTERNAL AC POWER APPLIED (M1068A3 ONLY)—Continued 0007 00 6Y 1. Remove cable W4 plug P1 (1) from Power Control Enclosure jack J25 (2). 2. Measure resistance between power supply PS2 (-) OUTPUT terminal (3) and jack J25 (2) outer sleeve. 3. Does multimeter read 0 ohms? YES NO 6YN 1. Replace circuit 32E (WP 0090 00) and (WP 0092 00). 2. Install cable W4 plug P1 (1) on Power Control Enclosure jack J25 (2). 3. Raise faceplate (4) and secure to Power Control Enclosure with ten new lockwashers (5) and screws (6). 4. Verify no faults found. 7Y 1. Install cable W4 plug P1 (1) on Power Control Enclosure jack J25 (2). 2. Raise faceplate (4) and secure to Power Control Enclosure with ten new lockwashers (5) and screws (6). 3. Verify no faults found. 0007 00-7/8 blank