TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 528 of 820
TM 9-2350-277-34 INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3) — Continued 0075 00 WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 72. Apply sealing compound to external threads of elbow (8) and drain cock (9). Do not apply sealing compound beyond small end of tapered threads. 73. Install new gasket (10) and fitting (11) on engine block and secure with two screws (12) and washers (13). 74. Install elbow (8) and drain cock (9) on fitting (11). 0075 00-16 Change 2