TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 527 of 820
TM 9-2350-277-34 INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3) — Continued 0075 00 68. Route second coolant pump hose and second engine hose into engine compartment. Leave engine hose for later connection to the engine after the power plant is installed. Route coolant pump hose (1) along front of engine compartment to coolant pump (2). 69. Install clamp (3) on coolant pump hose (1). Connect hose (1) to coolant pump shutoff valve (4). Tighten clamp. WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 70. Apply sealing compound to external tapered threads of elbow (5) and adapter (6). Do not apply sealing compound beyond small end of tapered threads. 71. Install elbow (5) in engine block fitting (7). Install adapter (6) in elbow (5). 0075 00-15 Change 2