TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 526 of 820
TM 9-2350-277-34 INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3) — Continued 0075 00 60. Connect battery box hose (7) to battery plates (2). Secure with two clamps (4). 61. Connect one coolant pump hose (8) and one engine hose (9) to battery plates (2). Secure hoses with two clamps (4). 62. Route hoses (8) and (9) along sponson to elbows (5) in floor plate. 63. Install one clamp (10) on each hose (8) and (9). Connect hoses to elbows (5) and secure with clamps (10). 64. Install one clamp (11) on each hose (8) and (9) and secure to seat bracket (12) with two screws (13), washers (14), and nuts (15). NOTE Do not kink hoses. 65. Install clamp (16) on hoses (8) and (9) and secure to weldnut (17) with screw (18) and washer (19). 66. Install batteries and retainers (see your -20). 67. Install one clamp (20) each on second coolant pump hose (21) and second engine hose (22). Connect hoses to elbows (5) under driver’s floor plate. Tighten clamps. 0075 00-14 Change 2