TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 513 of 820
TM 9-2350-277-34 INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3) 0075 00 THIS WORK PACKAGE COVERS: Installation (page 0075 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Direct Support T o o l s a n d S p e c i a l T o o l s Automotive Fuel and Electrical System Repair Tool Kit (WP 0120 00, Item 59) M a t e r i a l s / P a r t s Adhesive (WP 0122 00, Item 1) Cleaning compound (WP 0122 00, Item 8) Sealing compound (WP 0122 00, Item 27) Kit P/N 12349820 P e r s o n n e l R e q u i r e d Track Vehicle Repairer 63H10 R e f e r e n c e s See your -10 See your -20 E q u i p m e n t C o n d i t i o n Carrier blocked (see your -10) Battery ground lead disconnected (see your -20) Driver’s power plant access panel removed (see your -20) Power plant rear access panel removed (see your -20) Trim vane lowered (see your -10) Power plant front access door opened (see your -10) Driver’s compartment floor plates removed (see your -20) Rear and right front floor plates removed (see your -20) Power plant grille raised (see your -20) Carrier cooling system drained (see your -20) Personnel heater kit installed (WP 0072 00)(WP 0073 00) Power plant removed (see your -20) INSTALLATION NOTE Fuel hoses used on the engine coolant heater installation are the flareless type. If it is necessary to replace hose, the connection fittings must also be replaced. 0075 00-1 Change 2