TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 509 of 820
TM 9-2350-277-34 INSTALL PERSONNEL HEATER KIT (M1064A3 ONLY) — Continued 0073 00 62. Secure circuit 402 lead (6) to cradle (9) with cradle clip (10). 63. Secure circuit 402 lead (6) to four weldnuts (11) with four clamps (12), screws (13), and one strap (14). 64. Remove screw (15), securing clamp (16), and dome light lead (17) from weldnut (18). 65. Install clamp (16) on heater wiring harness (1), ground lead (19), and domelight lead (17). Secure clamp to weldnut (18) with screw (15) and two washers (20). 66. Install connector (21) of heater wiring harness (1) on control box connector (22). FOLLOW-THROUGH STEPS 1. Open fuel shutoff cock (see your -10). Check for leaks. 2. Connect battery ground lead (see your -20). 0073 00-15 Change 3