TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 476 of 820
TM 9-2350-277-34 INSTALL PERSONNEL HEATER KIT (M113A3, M1059A3, AND M58 ONLY) — Continued 0072 00 INSTALLATION NOTE Flareless (compression) fittings are used on the fuel lines. When these fittings are first installed, a sleeve is crimped on the tube or hose end. Consequently, when tubes or hoses are replaced, new fitting sleeves are also required. 1. Remove six screws (1), two cover plates (2), and two gaskets (3) from top of carrier. Discard cover plates and gaskets. 2. Remove locknut (4) and screw (5) from transverse beam. Discard locknut and screw. 3. Remove locknut (6) and screw (7) from engine compartment bulkhead. Discard locknut and screw. 4. Remove four locknuts (8) and screws (9) from engine compartment bulkhead. Retain four locknuts and screws. 0072 00-2 Change 3