TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 467 of 820
TM 9-2350-277-34 REPAIR AUXILIARY POWER UNIT COVER (M577A3 AND M1068A3 ONLY) 0071 00 THIS WORK PACKAGE COVERS: Inspection of Installed Items (page 0071 00-1). Repair or Replacement (page 0071 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Direct Support T o o l s a n d S p e c i a l T o o l s Industrial Sewing Machine (WP 0120 00, Item 51) M a t e r i a l s / P a r t s Adhesive sealant (WP 0122 00, Item 3) Vinyl coated nylon cloth (WP 0122 00, Item 34) P e r s o n n e l R e q u i r e d Fabric Repairman 43M20 R e f e r e n c e s See your -10 FM 10-16 E q u i p m e n t C o n d i t i o n Cover removed from carrier (see your -10) INSPECTION OF INSTALLED ITEMS 1. Check fabric. Weak or torn areas may be repaired by a cement patch or machined patch. All material used to repair the cover must be the same as the original material. 2. Check tensile strength of fabric. Grasp a small fold of fabric between thumb and forefinger of each hand, gripping it closely so tips of forefingers touch. Tug material several times. If it does not rip, it is repairable. If it tears on first tug, test several areas for extend of damage. Weak sections must be replaced. 3. Check for spots and stains. Non-wear spots and stains are all right if fabric has been brushed clean. Repair fabric where fabric strength has been weakened by mildew, sap, or dirt stains. 4. Check fabric. Repair opened seams, runoff stitching, and broken threads. Restitch worn stitching. 5. Check webbing straps. Repair or replace worn, frayed, or torn straps. 6. Check buckles. Replace buckles that are bent, broken, or missing. 7. Check for slide fasteners (zippers). Replace zippers that are rusted or do not work correctly. 0071 00-1