TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 456 of 820
TM 9-2350-277-34 REPAIR ENGINE AND TRANSMISSION STAND — Continued 0070 00 REPLACE JACK SCREW 1. Retract jack screw (11). Dowel pin behind bracket bushing should be horizontal and keyway in end of hand wheel tube pointing up. 2. Drive out pin (13). Discard pin. 3. Remove hand wheel (14) and tube (15). Be careful not to lose key (16). NOTE If hand wheel or tube requires replacement, go to Step 4, if not, go to Step 7. 4. Remove handle (1) from hand wheel (2). 5. Drive out pin (3) from hand wheel (2). Discard pin. 6. Install hand wheel (2) on tube (4). Align dowel holes and install new pin (3). 0070 00-6 Change 1