TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 438 of 820
TM 9-2350-277-34 REPAIR POWER PLANT SLING — Continued 0067 00 REPLACE DATA PLATE 1. Remove four drive screws (3) from data plate (4). Remove data plate. Discard plate and screws. NOTE To order a new data plate, provide Depot with the same information contained on the original dataplate: Contract Number, Serial Number, Date of Manufacture, Maximum Work Load, Proof Load, National Stock Number, PartNumber, and Commercial and Government Entity Code. 2. Locate new data plate (4) in same location. Use the data plate as a template to drill four mounting holes 3/64 to 1/16 inch diameter and 5/32 inch deep minimum. 3. Install four new drive screws (3) on data plate (4). REPAIR BEAM ASSEMBLY 1. Repair cracked or torn welds by machining or grinding the defective beam assembly (5) to approximately 1.0 inch beyond the defect. Minimum root dimension should be 1/16 inch radius. The base metal is aluminum, class 5083-H32. Use gas metal-arc welding process (GMAW) and ANSI/AWS A5.10, class 5356 electrode, weld size 1/4 inch minimum IAW MIL-W-45305, class A. 0067 00-4 Change 1