TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 427 of 820
TM 9-2350-277-34 REPLACE RAMP HYDRAULIC CYLINDER ANCHOR (M1064A3 ONLY) — Continued 0065 00 INSTALL 1. Install new anchor (1) with three new washers (2) and new screws (3). 2. TIGHTEN SCREWS TO 54-59 LB-FT (73-80 N•m) TORQUE. Use adhesive primer as lubricant on threads and under screw heads. 3. Install cylinder (4) on anchor (1) with headed pin (5). Secure with new cotter pin (6). FOLLOW-THROUGH STEPS 1. Install mortar turntable and ring gear. See TM 9-1015-232-23&P. 2. Install mortar in carrier (see your -10). 3. Start engine (see your -10). 4. Raise and lock ramp (see your -10). 5. Stop engine (see your -10). END OF TASK 0065 00-5/6 blank Change 1