TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 426 of 820
TM 9-2350-277-34 REPLACE RAMP HYDRAULIC CYLINDER ANCHOR (M1064A3 ONLY) — Continued 0065 00 6. Secure anchor (1) with one new washer (2) and one new screw (3). 7. Use new anchor (1) as template. Locate center of remaining two holes. Remove anchor. Drill and tap holes same way as first hole Step 3 and Step 4. 8. Clean surface with wire brush. 9. Paint any exposed metal surfaces. See TM 43-0139. 0065 00-4 Change 1