TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 405 of 820
TM 9-2350-277-34 REPAIR DRIVER’S HATCH COVER HULL HINGES — Continued 0061 00 INSTALLATION 1. Clamp or tack weld new hinge (1) or (2) on mounting ring (3). Set cover on mounting ring. Check alignment of cover hinges with hinges of ring (3). 2. Insert spring shield (4) through hinges (1)(2) and cover hinges (5)(6)(7). Seat shield in cover hinge (7). 3. Make sure hinges (1) or (2) are aligned and spaced as shown. 4. Weld hinge (1) or (2) to mounting ring (3) and hull. See TM 9-237. Use electrode type 5356. 5. Clean the weld area and apply touch-up paint to repaired area. See TM 43-0139. FOLLOW-THROUGH STEPS 1. Install driver’s hatch cover (see your -20). END OF TASK 0061 00-3/4 blank