TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 401 of 820
TM 9-2350-277-34 REPAIR DRIVER’S HATCH COVER HINGES — Continued 0060 00 INSTALLATION 1. Clamp or tack weld new hinge (1), (2), or (3) on hatch cover (4). Check alignment of cover hinges with hinges on hull. 2. Insert spring shield (5) through hinges (3) or (2). Seat shield in hinge (1). 3. Make sure hinges are aligned and spaced as shown. 4. Weld hinge (1), (2), or (3) to hatch cover (4). See TM 9-237. Use electrode type 5356. 5. Clean the weld area and apply touch-up paint to repaired area. See TM 43-0139. FOLLOW-THROUGH STEPS 1. Install driver’s hatch cover (see your -20). END OF TASK 0060 00-3/4 blank Change 2