Sign up to sell your inventory with NSN Lookup

TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download

Page 392 of 820

TM 9-2350-277-34 REPLACE RAMP ACCESS DOOR AND HINGES (M113A3 ONLY) — Continued 0057 00 NOTE Proper alignment and sealing of ramp door is accomplished by installing washer(s) between door hinges and ramp hinges to keep outer edges of door flush with ramp weldment within ± 1/ 16 inch (1.5 mm). 5. Install washers (9) between door hinges (6) and ramp hinges (2). 6. Install two screws (10) and new locknuts (11) on hinges (2)(6). 7. Check ramp door seal in the same manner as ramp seal. Chalk pattern should be evenly distributed over interior sealing lip of ramp door. If pattern is uneven, adjust door handle (see your -20). END OF TASK 0057 00-4