TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 386 of 820
TM 9-2350-277-34 REPAIR COMMANDER’S HATCH COVER HULL HINGES (M577A3 AND M1068A3 ONLY) — Continued 0056 00 3. Use a disc sander to sand chipped area smooth and remove any hard coating from weld area. INSTALLATION 1. Clamp or tack weld new hinge part (1), (2), or (3) on hull. 2. Install cover on hatch (see your -20). 3. Check alignment of hinges (1), (2), or (3) on cover with torsion bar shields and hinges on hull. 4. Remove cover. Weld hinges (1), (2), or (3) to hull. See TM 9-237. Use electrode type 5356. 5. Clean weld area and apply touch-up paint to repaired area. See TM 43-0139. 0056 00-2